BC Racing Nissan 350z (Z33) (03+) BR Series True Coilover Rear

BC true coilover rear set up's

BC Racing Coilovers are manufactured to extremely high standards. Every single damper produced by BC Racing is checked on their in house damper dyno so that they are 100% confident that every kit they build contains dampers with exactly the same compression and rebound damping rates.

BC Racing Coilovers are a direct replacement for your OE Suspension. The BC Racing range do not require you to make additional brackets or use cable ties or jubilee clips to install. The bottom mounts come with all of the necessary brackets to take the original ABS sensor leads, brake lines, anti roll bar drop links etc. Just take off your original equipment suspension and install the BC Racing suspension - it's that simple!

These BR Series Coilovers are designed for both street and trackday use. They use a large 46mm diameter piston in a 53mm diameter damper body to maximise oil capacity.

The lower spring platform of these BC Racing Coilovers are adjustable, therefore allowing the car to be set up to achieve perfect balance and ensure that maximum tyre efficiency is achieved. Ride height is adjusted by an adjustable bottom mount rather than the spring platform, so you retain full damper travel regardless of the ride height run.

These BR Series Coilovers feature 30 way damping adjustment that combines both rebound and compression in one adjuster for simplicity and ease of use. This adjustable facility allows you to fine tune the vehicle to meet the relevant conditions.

BC Racing coilovers are made in a factory which is TUV certified, although they do not have TUV approval

Fits

Nissan 350Z / Fairlady Z (Z33)
Years of manufacture: 03 onwards